Selection and coupling:


the development of a chain can be measured to control its degree of precision and verify that it corresponds to the reference standard. This measurement is performed on an assembled and unlubricated chain and differs for each type as below:
- short pitch precision chains: the reference standard is ISO606 which provides for a deviation from the nominal value equal to 0, + 0.15%;
- long pitch precision chains: the reference standard is ISO1275 which provides for a deviation from the nominal value equal to 0, + 0.15%;
- heavy-duty conveyor chains: the reference standard is ISO1977 and provides for a deviation from the nominal value equal to 0, + 0.25%;
- agricultural chains: the reference standard is ISO487 and provides for a deviation from the nominal value equal to 0, + 0.3%.
Coupling is a fundamental and necessary operation for all applications where two or more chains will have to work side by side and consequently, for their correct use, they must be selected to ensure a higher level of precision. This operation is performed internally by us with modular traction benches that, using fiber optics and a probe, detect the length of each chain strand with a precision of 0.01mm. Each single strand, divided according to the tolerance range established with the customer, is tagged to allow for correct and intuitive final assembly